Guangxi polymer compound waterproof membrane Dragon PCM scope of self-adhesive waterproofing membrane 
 Guangxi Dragon PCM polymer composite waterproofing membrane adhesive waterproofing membrane applied to all types of industrial and civil roofing, basements, tunnels, culverts, bridges, reservoirs, underground civil air defense projects, green roofs and so on. Especially for high railway, high tunnel waterproofing construction. 
 Width: 1m ~ 2m; Thickness: 1.2mm ~ 2.5mm; Length: 20m ~ 30m. 
 Note: Other Dimensions of self-adhesive waterproofing membrane, both supply and demand can be negotiated. 
 Guangxi waterproofing membrane Dragon PCM self-adhesive waterproofing membrane polymer composite construction process 
 According to engineering practice, PCM can be used wet polymer composites self-adhesive membrane shop, empty shop, machine fixed, pre-shop anti-stick, hanging shop and other paving methods, as well as bonding, welding and other bonding methods. 
 Guangxi polymer compound waterproof membrane Dragon PCM PCM self-adhesive waterproofing membrane membrane Stones 
 1, first determine the order and direction of the coil Stones, and play on-line at the grassroots level, and Stones roll: 
 1) Show paved method: cut the membrane to be a good shop, Fanpu on the base surface, and all the isolated strip of paper coil, the coil end of the paste in the Reservation, to move along the baseline paste, then use the roller to both sides, rolling forward exhaust cement; 
 2) rolling shop method: lift peel release paper and Stones roll at the same time, the coil shop scheduled to be carried in part, on good baseline, isolated from the bottom sheet of paper, one end of the coil fixed to start roll about 500mm or so, and then push the shop while the side with the roller to roll on both sides and the front roll exhaust cement. To ensure that the initial bond strength, coil straight longitudinal lap. 
 2, PCM coil overlap process: different materials can be used by lap and butt welding. Lap time lap width of 80 mm-100mm. Automatic hot air welding machine crawling lap width of 60mm; seams parallel docking available 120mm wide double-sided adhesive tape to enhance processing, and then compacted with a roller force. Ensure that the waterproofing membrane was stuck on the knot firmly between the use of anti-stick technology also can be mechanically fixed everything works. 
 3, repair: self-adhesive Self-adhesive waterproofing membrane appears damaged should be repaired, using the PCM membrane can be directly pasted breakage. Broken edge of the repair material is greater than 100mm and should be compacted seal. 
 4, the coil to close the first deal.