Guangxi waterproof paint Dragon Waterproof JS composite waterproof coating material Profile 
 South waterproof coating waterproof Dragon JS composite waterproof coating "Dragon brand" CQ105JS composite waterproof coating is the introduction of Germany advanced technology and key raw materials by the organic liquid material and the inorganic powder composite made of two-component waterproof material. 
 The Guangxi waterproof coatings Dragon main features of the water-JS composite waterproof coating 
 A wet surface construction; coating tough high strength; 
 2, the pigment can be made of colored decorative layer; 
 3, non-toxic, odorless, and can be used for edible pool of water; 
 4, applies to the external wall finish materials, inclined roof waterproofing, facade, bevel and the top surface of the construction, with a waterproof coating of the base surface and decorative brick, roofing tile, cement mortar Guangxi Dragon waterproof JS composite waterproof coating outer layer firmly bonded; 
 5, high temperature (140 ° C), especially suitable for road and bridge waterproofing; 
 6, adjusting the mix ratio can be made of ceramic tile adhesive materials and sealing materials. 
 Guangxi Dragon waterproof waterproof coating JS composite waterproof coating the scope of application 
 1, industrial and civil roofing; 
 2 toilet and bathroom, kitchen, water, moisture and engineering; 
 Walls, basements, swimming pools, tanks, water and other; 
 4, the waterproof coating sub-Ⅰ and Ⅱ are two kinds of usage is different: 
 The ① JS-I type is mainly used for deformation of a large part of the roof, basement, etc.; 
 (2) JS-II type is mainly used for the deformation of the smaller parts such as exterior walls, basement, closets and bathroom and so on. 
 Guangxi waterproof coating Dragon Waterproof JS composite waterproof coating construction engineering method selection 
 Construction method Ⅰ-based surface coating on the underlying → coating → → to play 
 Construction Method II base surface coating on the coating → the underlying → coating → → to play 
 → surface engineering methods III to fight the underlying → coating → coating on the non-woven layer → coating → 
 Ingredients: per square meter 2.1kg-3.0kg 
 Guangxi waterproof paint Dragon Waterproof JS composite waterproof coating construction points 
 1, the base surface smooth, solid, clean, Mingshui, no leakage, uneven and full of cracks at the required leveling, yin and yang should be made of angle of the arc angle; 
 2, the exact ingredients: easy to use for the user, strictly according to the ratio requirements for packaging, use only the powder while stirring slowly add to the corresponding liquid compound, and stir until uniform fine mixture does not contain aggregate . 
 3 coated essentials: 
 1 roller or brush coating, according to the layer of the order of the selected construction method; 
 ② If the paint (especially the base material) precipitation should always Stir; 
 ③ coating to be as uniform as possible and not local deposition; 
 ④ layers of the time interval between the previous layer of the coating to dry sticky subject; 
 Under the coating (5) construction method III, the non-woven layer and the coating must be continuous construction. 
 Guangxi Dragon waterproof waterproof coating JS composite waterproof coating Note 
 Not below 0 ° C or in the rain, construction, and not in a particularly humid environment without ventilation construction. 
 The Guangxi waterproof paint Dragon Waterproof JS composite waterproof coating storage and transportation and packaging 
 Shade, powder, liquid material to be kept above 5 ℃ should be placed in a dry place. Pay attention to moisture, sun, the shelf life of six months; 
 2, the product powder with a composite bags, liquid material with a plastic bucket; 
 Type Ⅰ: 6.8kg / sets of 17 kg / sets, 51 kg / sets, 85 kg / sets 
 Type Ⅱ: 10 kg / sets, 50 kg / sets, 125 kg / set.